6x14mm Short Expansion Screws Set
6x14mm Short Expansion Screws Set
BUNDLE & SAVE
Couldn't load pickup availability
-
Ordered
- - -
Order Ready
- - -
Delivered
6x14mm Short Expansion Screws Set
The Permanent Fix for Stripped Hinge Holes
Still Dealing With Sagging Cabinet Doors?
Still trying to fix stripped hinge holes with wood glue and toothpicks? When the original hole is hollowed out, tightening a bigger screw just ruins the wood further. You don't need a new cabinet door. You need a structural anchor.
The Metal-Reinforced Grip
Stop relying on weakened particle board. As you drive the screw in, this carbon-steel sleeve expands outward, biting deep into the surrounding wood. It creates a rock-solid, metal-lined mounting point that will not pull out.
Sized Perfectly for Thin Panels
Standard wall anchors are too long and will punch right through the front of your cabinet. At exactly 14mm deep, these short-profile sleeves require only a 15mm drill depth. You get maximum holding power without ruining the finish.
Built for Heavy Daily Use
Kitchen cabinets swing open dozens of times a day. That is why these anchors are forged from heavy-duty carbon steel with a rust-resistant zinc-plated finish. They take the stress off the wood and put it entirely on the metal.
Stop Pitching Good Furniture Over Stripped Screws
Throwing away a solid wardrobe because of one blown-out hinge hole is a waste of money. This kit is for the person who'd rather fix a problem than replace the whole cabinet. These carbon-steel sleeves restore that solid, wobble-free swing to your doors, letting you salvage your furniture and prove you've got the tools to maintain your home properly without hiring a pro.
Stock Your Toolbox for Future Repairs
Don't wait for the next kitchen hinge to rip out of the particle board. These zinc-plated anchors come in bulk packs up to 180 pieces, so you can reinforce every weak point in the house at once. Keep a set in your drawer and be ready to swap those failing wood screws for a metal-reinforced grip the moment a door starts to sag.
Why This Kit Wins
Stop wasting time with temporary fixes that just rip out again a month later.
| pinkdiyprint.com | Wood Filler & Toothpicks | |
|---|---|---|
| Permanent metal-reinforced grip | ||
| Expands to lock into damaged wood | ||
| Short 14mm depth for thin cabinet doors | ||
| Rust-resistant zinc-plated steel | ||
| Strips out again after a few months |
What Practical Homeowners Are Saying
Frequently Asked Questions
What size drill bit do I need?
What size drill bit do I need?
You will need a standard 6mm drill bit. Drill to a depth of at least 15mm to ensure the anchor sits flush with the wood surface before driving the screw.
Will this poke through the front of my cabinet?
Will this poke through the front of my cabinet?
No. The anchors are specifically designed with a short 14mm profile to fit standard cabinet doors and panels without punching through the other side.
Can I use this on particle board or MDF?
Can I use this on particle board or MDF?
Absolutely. The expansion sleeve is designed to bite into particle board, MDF, and solid wood, creating a secure hold where the original material has failed.
How many come in a pack?
How many come in a pack?
We offer bulk packs of 30, 60, 120, and 180 pieces. We recommend grabbing a larger pack so you always have the right hardware on hand for future household repairs.