Small Parts. Massive Difference.
Is Your Car Roof Resting On Your Head?
Factory interior glue fails. When it does, you are left with a drooping, embarrassing fabric tent resting on your head during the daily commute.
Upholstery shops want hundreds of dollars to replace it. You don't have to pay that.
The 15-Minute Driveway Permanent Fix
Bypass the failed factory glue entirely. Our self-tapping anchor system bites directly into the internal roof board for a solid, mechanical hold.
No messy spray adhesives. No dropping the whole headliner. Just a quick, permanent fix you can do yourself this weekend.
Looks Like A Custom Tufted Interior
A cheap fix shouldn't look cheap. Once the metal washer and screw are secured, our textured woven fabric caps snap right over the hardware.
It blends seamlessly with your existing ceiling, turning a repair job into a clean, button-tufted design choice.
For The Driver Who Knows Better
There are people who will blindly hand over $400 to a mechanic for a purely cosmetic fix. You aren't one of them.
You take pride in finding the smart, practical workaround. Restore your headroom, improve your car's resale value, and keep that cash in your pocket.
Enough Hardware To Secure Your Entire Roof
Stop worrying about missing a spot. This 50-piece kit gives you enough self-tapping screws and textured caps to fix a full-sized sedan or SUV headliner from front to back. Choose between Beige, Black, or Grey to match your factory interior. You get a solid metal bite into the roof board and a clean, woven finish that looks like it belongs there, not like a desperate patch job.
Stop The Heat From Melting Your Interior
High summer temperatures turn old factory glue into a sticky, failing mess. When that fabric starts drooping, it won't be long before it's blocking your rearview mirror or resting on your hair. Instead of sweating through a messy spray-adhesive failure, spend 15 minutes snapping these anchors into place. Itâs a permanent mechanical hold that won't peel off when the sun hits the roof.
Why Smart Drivers Choose This
Stop wasting time with messy spray adhesives that just melt again in the summer heat. Get a permanent mechanical hold.
|   | pinkdiyprint.com | Upholstery Shops |
|---|---|---|
| Under $20 total cost | ||
| 15-minute DIY installation | ||
| Bypasses failed factory glue | ||
| No messy spray adhesives | ||
| Requires dropping the whole roof |
What Practical Drivers Are Saying
Frequently Asked Questions
Will these match my car's interior?
Will these match my car's interior?
Yes! We offer the caps in the three most common OEM interior colors: Beige, Black, and Grey. The textured woven fabric blends cleanly with standard headliner materials.
Do I need any special tools?
Do I need any special tools?
No special tools required. You just need a standard Phillips-head screwdriver to drive the self-tapping screws through the washers and into the roof board.
Will the screws damage my car's metal roof?
Will the screws damage my car's metal roof?
No. The self-tapping screws are sized to bite securely into the internal fiberglass or cardboard roof board, not the exterior metal shell of your car.
Is 50 pieces really enough for a whole car?
Is 50 pieces really enough for a whole car?
Absolutely. A 50-pack provides more than enough anchor points to secure a severely sagging headliner in a standard sedan, truck, or SUV.